Unit Usp 1020d Instruktsiia Apr 2026

Connect a compatible 6V AC adapter into the DC port on the side of the device. ⚠️ Note: Do not use both simultaneously. 2. Setting Date and Time

4 x AA Batteries (or AC Power Adapter, depending on the bundle) 1 x Instruction Manual & Warranty Card 1 x Storage Case ⚙️ Device Setup unit usp 1020d instruktsiia

Once the measurement is complete, the cuff deflates, and the screen displays: Systolic (top number) DIA: Diastolic (bottom number) PULSE: Heart rate per minute Connect a compatible 6V AC adapter into the

Before taking your first measurement, ensure the device is configured correctly. 1. Power Supply Setting Date and Time 4 x AA Batteries

Open the battery compartment on the bottom. Insert 4 AA batteries, ensuring correct polarity (+/-).

In memory mode, press and hold MEM and SET simultaneously until "CL" appears on the screen. ⚠️ Error Codes & Troubleshooting Er 1 Sensor is abnormal Check cuff connection and try again. Er 2 Pulse signal not detected Ensure cuff is snug and you remain still. Er 3 Measurement result error Relax for 2 minutes and retake the test. Er 4 Cuff is too loose or leaking Re-wrap the cuff tightly. Low Battery Batteries are drained Replace all 4 batteries with fresh ones. 🧼 Maintenance & Storage Clean the monitor with a soft, dry cloth. Never submerge the cuff or monitor in water. Store in a cool, dry place away from direct sunlight.