Tomagavk Tw 9010 Instruktsiia Apr 2026

Press Button 1 once. The siren chirps once, and lights flash once.

I can also look up the specific (AF settings) if you need to change the behavior of the locks or lights. tomagavk tw 9010 instruktsiia

The engine will continue running for 1, 3, or 6 minutes after the key is removed. ⚙️ Programming New Remotes If you need to pair a new key fob: Turn the . Press Button 1 once

Usually opens the trunk (hold for 2 seconds). Button 4 (Query): Checks car status (temperature/voltage). Button 5 (Set): Used for programming and backlight. 🛠️ Operating Modes Arming the System The engine will continue running for 1, 3,

Press Button 1 and hold (or press twice quickly depending on settings).

If you need help with a specific task, I can provide more details if you tell me: Are you trying to ? Are you having trouble with the remote start feature? Do you need the wiring diagram for installation?

Press and hold on the new remote simultaneously until a chirp confirms pairing. Repeat for up to 4 remotes. Turn Ignition OFF to exit. ⚠️ Important Safety & Installation Notes Installation Tip Antenna Place high on the windshield, away from metal. Valet Button Hide it, but keep it accessible for emergencies. Shock Sensor Mount firmly to a metal part of the car body. Temperature Sensor Attach to the engine block for accurate remote start data. 📉 Troubleshooting Table Potential Cause Short Range Low remote battery or antenna interference. Replace CR2032 battery; move antenna. No Remote Start Hood is open or handbrake is not engaged. Close hood; check handbrake wire. False Alarms Shock sensor is too sensitive. Adjust the dial on the sensor unit.