Once the progress bar reaches 100%, the device will typically reboot.
: Choose your specific model (e.g., PV-3B or AX M2 5000-48) from the application menu.
Right-click the file and select "Extract Here" or "Extract to PV Update v1.1.0/" . PV Update v1.1.0 .7z
: Click "Update MCU" or "Start Update" . Do not disconnect the device or power off your computer during this process, as it could "brick" (permanently damage) the hardware. 4. Verification
: Launch the update application found in the extracted folder (often titled PV Update Client or ReflashTool_Xseries ). Once the progress bar reaches 100%, the device
This guide covers the installation of "PV Update v1.1.0 .7z," a firmware or software update package typically used for devices or Photovoltaic (PV) inverters . 1. Extract the Update File
Always back up your current device settings or "Tune Database" before applying an update. Update Firmware & WinPV Software Power Vision : Click "Update MCU" or "Start Update"
Check the device's or "Information" menu to confirm the version now displays v1.1.0 .