(05-25-22).mp4 | Nb - Table Assembly

: Hardware can loosen due to the vibration of moving the workstation; connections should be checked and re-tightened periodically. Assembly Instructions TABLE

: Must be mounted to the underside of the shelf before the shelf is attached to the mast.

: Ensure the battery voltage does not drop below 10.8V to maintain operation. Accessory Installation : NB - Table Assembly (05-25-22).mp4

: The vertical mast is secured to the base, which often features large industrial casters for mobility.

: Always ensure the table is on a flat, level surface and that casters are locked before use. : Hardware can loosen due to the vibration

: Post-mounted screen holders or laptop holders are attached to the top laminated shelf using wood screws. Critical Maintenance & Safety

: The main tabletop (laminated surface) is attached to the frame. A shelf bracket is typically secured to the underside of the surface using #10-¾” screws. Support & Power Integration : Accessory Installation : : The vertical mast is

: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.