Nad Phono Preamp Pp2 Manual 🔥

: Never connect the PP 2 to an input marked "PHONO" on your receiver, as this will cause severe distortion.

: Ensure all equipment is turned off and the PP 2 is disconnected from its power supply. Connect Turntable :

Move the PP 2 away from other equipment (like power transformers) to reduce interference. Nad Phono Preamp Pp2 Manual

If you encounter issues, refer to the following common solutions: :

Follow these steps to correctly integrate the PP 2 into your audio system: : Never connect the PP 2 to an

: Toggle the rear MM/MC switch to match the input you used.

The is a compact, low-noise device designed to add a turntable to modern amplifiers or receivers that only have "Line-Level" inputs (like CD, AUX, or Tuner). It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges via separate inputs and a rear selector switch. 1. Setup & Installation If you encounter issues, refer to the following

: Connect the external 24V power supply to the PP 2 and plug it into a wall outlet. A green LED on the front panel indicates the unit is powered. 2. Technical Specifications