can be difficult to remove from porous surfaces and may stain trim.
: Do not let the product dry or "flash" on the paint. Wipe off the residue immediately while it is still damp to prevent it from becoming difficult to remove Refining the Finish :
: Thoroughly wash and dry the vehicle. Use a clay bar to remove bonded surface contaminants before compounding. Taping and Protection : Tape off plastic trim, rubber seals, and gaps. m105-s008-9175.jpg
To achieve a mirror-like finish without damaging your clear coat, follow these professional application steps:
, specifically the size. This professional-grade compound is used for heavy paint correction, removing deep scratches, acid rain etching, and severe swirls. Guide to Using Meguiar’s M105 Ultra-Cut Compound can be difficult to remove from porous surfaces
, using a to remove any remaining haze and maximize gloss.
: Use a pad brush or compressed air to clean your foam pad after every section to prevent "spent" product and removed paint from gumming up the surface. Use a clay bar to remove bonded surface
: Use a Dual Action (DA) polisher at speed 5–6 with firm, overlapping passes.