9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
To prevent unwanted image updates during setup, use: delete chassis auto-image-upgrade . 3. Interface and Network Setup Juniper Ex4200 Configuration Manual
The port is often the default management interface for initial setup via J-Web. 9600 baud, 8 data bits, no parity, 1
This report outlines the standard procedures for the initial setup and configuration of a Juniper EX4200 Go to product viewer dialog for this item. 8 data bits
Use show configuration to see the active settings.
The following commands establish basic system identity and security: set system host name [NAME] .
