Jb 160zip (2026)

: Lower the poker head (the 45mm metal tip) vertically into the concrete. Avoid dragging it horizontally through the mix, as this can create "tracks" or uneven density.

: Regularly check the internal metal cable (the core) for proper lubrication to prevent friction-related snaps. Specifications Poker Diameter : 45 mm Shaft Length : 4 meters

: Multi-layer twisted steel wire core with a protective rubber outer shell. Jb 160zip

: Hold the head in the concrete for roughly 5–15 seconds until the surface around the poker becomes shiny and air bubbles stop rising.

: Connect the flexible shaft to the drive unit (vibrator motor). Ensure the coupling is secure and locked. The shaft is typically 4 meters long, allowing for significant reach. : Lower the poker head (the 45mm metal

: Lift the poker out slowly while it is still vibrating. This allows the concrete to flow back into the hole left by the tip. Maintenance :

: Always wash the poker head and the rubber-coated shaft with water immediately after use. Once concrete hardens on the equipment, it is difficult to remove and can cause overheating. Specifications Poker Diameter : 45 mm Shaft Length

The is a flexible shaft and poker head assembly used with portable concrete vibrators, specifically designed for Spektrum equipment. It is used to remove air bubbles and consolidate freshly poured concrete to ensure structural integrity. Quick Setup & Usage Guide