How To Fix Water Damaged Ceiling Direct

Elias didn't reach for the white ceiling paint yet. He reached for a can of (like KILZ or Zinsser). He knew that water stains are stubborn; they "bleed" through regular latex paint no matter how many coats you use.

"Sand, mud, repeat," he whispered. It took three thin coats and some dusty sanding to make the patch disappear into the rest of the ceiling. Phase 4: The Finishing Touch how to fix water damaged ceiling

The steady drip... drip... drip was the only sound in the hallway, a rhythm that made Elias’s heart sink faster than the water pooling on his hardwood floor. He looked up to see a yellowish, sagging blister right in the middle of the hallway ceiling. "Great," he muttered. "The upstairs bathroom." Elias didn't reach for the white ceiling paint yet

Once the area was dry a day later, Elias set up a ladder. He used a utility knife to cut out the soft, crumbly sections of drywall, creating a clean, rectangular hole. He checked the wooden joists inside; luckily, they weren't rotting. He set up a fan and let the "innards" of the ceiling dry out for 24 hours. Dampness is a playground for mold, and Elias wasn't inviting that guest over. Phase 3: The Patch "Sand, mud, repeat," he whispered

After the primer dried, he rolled on the final coat of ceiling white. He stepped back, wiping dust from his forehead. The hallway looked brand new, and the rhythmic drip was finally replaced by a satisfied silence.

First, Elias raced upstairs. The kids had let the shower curtain hang outside the tub again. He mopped up the standing water and tightened the supply line for good measure. Back downstairs, he grabbed a bucket and a screwdriver. With a deep breath, he poked a small hole in the center of the sagging drywall. A stream of trapped water let go, splashing into the bucket.