Gyro Series 3ch-777 Instructions Site

: Push the Left Throttle Stick all the way to the top and then pull it all the way down. The blinking lights on both the helicopter and remote should become solid, indicating they are paired. 3. Flight Controls Flying a 3 Channel RC (gyro) Helicopter. - Instructables

: Install 3 to 6 AA or AAA batteries (depending on the specific 777 sub-model) into the transmitter. 2. Binding (Syncing) the Remote Gyro Series 3ch-777 Instructions

This report provides the essential instructions for operating the (also known as the GHG3-6 tactical wireless helicopter), a 3.5-channel infrared remote-controlled helicopter. 1. Pre-Flight Preparation & Charging : Push the Left Throttle Stick all the

Switch on the helicopter first (LEDs will flash), then switch on the remote. Flight Controls Flying a 3 Channel RC (gyro) Helicopter

: Connect the included USB cable to a computer or standard USB adapter. A light on the cable usually glows during charging and turns off (or changes color) when complete.

The helicopter is powered by a built-in Li-Polymer battery and typically requires about of charging for an 8-minute flight.

: Ensure the helicopter’s power switch is in the OFF position before charging. Charging Options :