G61136.mp4 «SIMPLE • STRATEGY»

Willys Jeep How To: 4-134 F Head Accelerator Linkage Install

Mount this to a bracket held by a headbolt outside the rocker cover. It typically includes a spring and thrust washer. g61136.mp4

Attach the retracting spring between a port plug and an L-bracket to provide the necessary "snap-back" action for the gas pedal. Alternative Identifications While primarily a Jeep part, G61136 may also refer to: Automotive Suspension: A part number for an OPTIMAL front lower suspension arm used in some European car models. Office/Furniture: A replacement key code for Ahrend office furniture locks Willys Jeep How To: 4-134 F Head Accelerator

Install the pivot bolt (often an extended hex bolt) with a washer, slide the lower bellcrank on, and secure it with a washer and cotter pin. This kit includes the necessary washers and cotter

The code most commonly refers to an Accelerator Linkage Hardware Kit for 1950–1971 Willys and Jeep vehicles equipped with the 4-134 F-head engine.

This kit includes the necessary washers and cotter pins to connect the accelerator pedal to the engine bellcranks and throttle linkage. Installation Guide Overview

Use a longer rod to connect the lower bellcrank to the upper bellcrank (positioned between the manifold and block). A shorter rod then connects the upper bellcrank to the throttle on the carburetor.