Attach a saline-filled syringe to the port labeled "W" and flush until fluid exits the distal tip.
Inspect the package and device for any damage during transport.
Hold the system vertically (tip down), apply negative pressure for 30 seconds, then release to neutral to allow contrast to fill the lumen. Never use air to inflate the balloon, as it causes uneven expansion or rupture. 3. Deployment Guidelines g60492.mp4
outside the U.S.). This device is a balloon-expandable stent used primarily to treat aortoiliac occlusive disease .
The device is sterile for one procedure only ; do not resterilize or reuse. Attach a saline-filled syringe to the port labeled
Do not inflate the balloon before the stent is in the target position.
Use an appropriately sized introducer sheath (typically 6 Fr to 8 Fr depending on the stent diameter) to minimize resistance. 4. Safety Warnings Never use air to inflate the balloon, as
The filename g60492.mp4 refers to an instructional video for the (also marketed as the Advanta V12
Attach a saline-filled syringe to the port labeled "W" and flush until fluid exits the distal tip.
Inspect the package and device for any damage during transport.
Hold the system vertically (tip down), apply negative pressure for 30 seconds, then release to neutral to allow contrast to fill the lumen. Never use air to inflate the balloon, as it causes uneven expansion or rupture. 3. Deployment Guidelines
outside the U.S.). This device is a balloon-expandable stent used primarily to treat aortoiliac occlusive disease .
The device is sterile for one procedure only ; do not resterilize or reuse.
Do not inflate the balloon before the stent is in the target position.
Use an appropriately sized introducer sheath (typically 6 Fr to 8 Fr depending on the stent diameter) to minimize resistance. 4. Safety Warnings
The filename g60492.mp4 refers to an instructional video for the (also marketed as the Advanta V12
