Bale Band V 2.2 Apr 2026

: Use the red-handled clamp to secure the strap. Do not adjust this clamp while the hydraulic power is off, as it can damage the assembly. Monitoring & Maintenance

: Place the new spool; this is recommended as a two-person operation .

Before beginning, ensure the machine is in the correct state to prevent software or mechanical errors. Bale Band v 2.2

: Modern units (v 2.2 and above) are computer-operated via the iBand-It app , which links to the machine via Bluetooth to monitor bale positions and settings.

: The hydraulic return line must be connected directly to the tractor's tank to ensure zero back pressure , which is the most common cause of Strap Guide Arm failures. Threading Steel Strapping Correct threading is vital for consistent bundling. : Use the red-handled clamp to secure the strap

: Inside the electrical boxes, red LEDs indicate active inputs. For example, photo eye LEDs (inputs #10, 11, and 12) stay on when no bale is present.

: The back gates open, and the bundle exits the machine while the cycle resets. Operator's Manual - Bale Band-It Before beginning, ensure the machine is in the

The refers to the updated operational software and manual version for the automatic bundling system manufactured by Pike Mfg . This system streamlines hay production by taking small square bales and bundling them into steel-banded 21-bale packs. Pre-Operation Setup