: A subtle "H" (High-relief) taper where the bottom edge is 3/4" thick for a sturdy floor transition, while the top beveled edge thins to 1/2" for a sleek, low-profile look against the drywall. Technical Specifications Material : Vertical Grain (VG) Western Hemlock. Dimensions : 0.75" x 11.25" (Actual US Standard for 1x12).
g., a 1x12 battery header) or ? If you can provide the category , I can tailor the specs further. 1x12_B_H_US_
: A modern, minimalist 12-degree bevel on the top edge that transitions into a flat face, providing a sharp architectural shadow line without the bulk of traditional crown molding. : A subtle "H" (High-relief) taper where the
: A specialized US-standard gray primer applied to all six sides, specifically formulated to prevent the "tannin bleed" often seen in Western Hemlock when exposed to humidity. : A specialized US-standard gray primer applied to
: S4S (Surfaced on 4 Sides) with a pre-sanded 180-grit face.
Based on the naming convention , this likely refers to a specific lumber or architectural moulding profile (1x12 Board, Beveled or Bullnose, Hemlock, US Standard).
|
|
|
|
|
|